made from corten steel
Where other fountains stop, the AQUA CUBUS series begins: Spring fountains in stainless steel or Corten steel up to XXL size. The installation takes place in a stable and large-volume, hot-dip galvanised water collection vessel with integrated adjustment option. The scope of delivery includes all the material necessary for installation: Spring fountain, hot-dip galvanised water collection vessel, high-quality pump and LED spring stone lighting.
The compact spring fountains can be set up easily and quickly and are therefore also suitable as eye-catchers for trade fairs, for example. Simply set it up level, fill it with water and connect it to the power supply – done.
Spring fountain AQUA CUBUS
without rim - as single well
A favorite piece for fairs, but also for front gardens or smaller gardens is the spring fountain without edge. It can be set up quickly and is immediately ready for use when filled with water. Since we manufacture the spring fountains ourselves, the dimensions can be made according to your wishes on material and dimension. As standard, we supply cubes with a square cross-section of 300 x 300 mm² or 500 x 500 mm² and graduated heights up to 1,200 mm. The hot-dip galvanized cover plate can be covered with decorative gravel.
Spring fountain AQUA CUBUS as trilogy
Why put only a single fountain, when three are much nicer! There are two different trilogies from the AQUA CUBUS series. In the SIENA spring fountain trilogy, three individual water columns are placed at graduated heights on a water collection vessel. Each column has its own water outlet, which is visually emphasized by LED lighting at the source outlet. The water runs down the cubes and collects in the hot-dip galvanized water collection basin below.
In the trilogy CAPRI three columns, also of different heights, were welded together. Thus, the trilogy can be set up and adjusted in just a few steps. The water is pumped up from the water collection vessel via a pond pump and exits at the highest column. From there, it cascades down and collects in the round GRP basin. Again, each cube has LED lighting to make it really sparkle. In both cases, the water collection vessel can be buried and visually covered with decorative gravel.
for water collection vessels
Spring fountain AQUA CUBUS
with rim - as a single fountain
Elegant and compact spring fountain in stainless steel or stainless steel – suitable for any garden. Installation possible inside and outside. The fountain is completely functional including pump and LED source lighting, light color warm white. Two sockets are necessary for lighting and pump. The water collection vessel is integrated into the fountain system, the inside sealed with elastic and UV-resistant Gartenmetall® plastic coating as rust protection.
TIP for in-house exhibitions:
The AQUA CUBUS with rim is delivered ready assembled. Assembly and transport are so simple that the objects are ideal for in-house exhibitions, etc., where water elements always act as a crowd puller.
with rim - as multiple wells
Our multiple well is the water feature for the urban space or the spacious private garden. Multiple source outlets create an exciting eye-catcher and enliven the atmosphere visually and acoustically.
The water collection vessel is integrated into the fountain system and lined on the inside with the proven Gartenmetall® plastic coating to protect against rusting through and rust-brown water. Delivery completely functional incl. Pump and LED source stone lighting. Light color warm white as standard. Depending on the number of source outlets, several sockets are necessary. Made by Gartenmetall®.
Note: In the case of stainless steel or color-coated stainless steel designs, water can always be expected to bead off due to the smooth surface in combination with the water surface tension. Example fountain: Color coated spring fountain AQUA CUBUS rectangular, anthracite gray RAL 7016