Metal path edging strips and lawn edges
The ECO-LINER path edging strips are a simple and cost-effective option for gardening and landscaping as well as for road construction and civil engineering. The path edging tapes are used in public areas, for example for path edging or bed edging in parks and squares. But even in private gardens, the bands of corten steel or other types of metal can quickly and easily draw clear boundaries.
In contrast to the EASY-LINER way limitation system, there are practically no variants of the ECO-LINER. The prefabricated flat material is supplied from stock in lengths of 200 cm and 300 cm. On the construction site, the metal strips are simply cut to the appropriate length using a cutting disc or metal saw. Our flat iron anchors can be used for fastening. These are hammered into the floor and thus fix the metal strip securely and stably at the desired depth.
Standard dimension of the path limiting strips
In favor of a low price and the possibility of delivery from stock, metal lawn edgings are limited in dimensions and materials, unlike EASY-LINERS. In stock we have two standard lengths 200 cm and 300 cm, which can be cut to size on site. Note: For sheet thickness 2 mm, the liner length is 1,920 mm instead of 2,000 mm for technical reasons. However, there are numerous variants for the heights and the material thickness. The exact dimensions can be found in the product information.
As a rule, the strips can be bent manually: With a sheet thickness of 3 mm, radii > 300 cm can be bent by hand. With a sheet thickness of 2 mm, even radii > 100 cm are possible!
Tip: Snail protection with corten steel LINERS
Did you know that corten steel is an almost insurmountable obstacle for snails? Rust contains small amounts of copper, but it is sufficient to prevent snails from crawling further. This results in the ideal use of corten steel LINER as a vegetable bed.
on the construction site - short handling
The handling and installation of ECO-LINER path delineation strips is very simple and can usually be done directly on the construction site.
Flat iron anchor with receiving slot
for straight line and outside corner
Our flat iron anchors for plugging are used to fix the bands stably in the ground. We recommend the use of one anchor per 100 cm. The anchors are made of high quality Corten steel or stainless steel, precisely beveled and preloaded for the liners to be clamped. There are two different forms of flat iron anchors: for straight lines and for outside corners. Attention: The flat iron anchors are protected by copyright!
The main advantages of the anchors are that accurate pre-planning for installation is no longer necessary. You drive onto the site with a “box” of flat iron anchors, a “stack” of liners and a cut-off machine (Flex) and just start building.
Flat iron anchor for straight line
The flat iron anchor for straight lines offers a stable receiving slot, which fixes the path delimitation strip stably. It is fixed in the ground together with the liner. Plate thickness flat iron anchor: 3 mm.
Flat iron anchor for corners
This flat iron anchor provides hold on outside corners. Either two individual strips can be joined together to form a corner or a folded strip can be fixed. Here, too, the anchor is fixed in the ground together with the liner. Plate thickness flat iron anchor: 3 mm.
ECO liner and flat iron anchor
There are numerous ways to fasten the ECO-LINER into the ground using flat iron anchors. The following examples give you ideas on how to make assembly quick and easy in practice.
Corner connection I
- Corner: two base modules butted, connected with corner anchor in the corner
- or: Pre-bent corner, fixed with two flat iron anchors
ECO-LINER - EASY-LINER
If price and delivery time are most important to you, you should choose the ECO-LINER system. In contrast to the EASY-LINERS, there are hardly any variants here. Prefabricated lawn edging and path edging strips made of ordinary mild steel, Corten steel or hot-dip galvanized steel can be delivered immediately from stock and adjusted to length on site with a cutting disc or metal saw. Fastening in the ground is done with local point foundations and flat iron anchors for plugging.
- Favorable price
- Simple handling
- universally applicable
- Available from stock
- No variant production
- only selected dimensions available
- Always adaptation on site necessary
- no stainless steel or metal color coated available
With the EASY-LINER system, in contrast to the ECO-LINER system, all conceivable variants and fastening options are available. The EASY-LINER are manufactured customer-specific with corresponding planning effort. This makes the EASY-LINER system more expensive. You can find more ideas from the category EARTH here.