ECO-FOLD-LINER

with folded top edge

ECO-FOLD-LINER

Lawn edge with folded top edge

Another product from the family of path delineation tapes is our ECO-FALZ-LINER. Its distinctive feature is the rounded edge on the top. The idea was to offer a simple and affordable option for builders. In contrast to the GARTENMETALL® system ECO-LINER, the ECO-FALZ-LINER is only available in Corten steel and in the low material thickness 1 mm or 2 mm. The folding at the top edge, which visually creates a width of 6 mm with round edges, gives the system its name. In addition, this ensures sufficient stability even with thin material, for a visually well-formed edge and it reduces the risk of injury. The rebate can elegantly accommodate the connecting or retaining elements, invisible after installation.
You can find more ideas from the EARTH category here.

Corner element unbent
Corner element unbent

Everything important at a glance.

ECO-FOLD-LINER

Information material

Technical product info
ECO-FOLD-LINER

Important note

Due to the stabilizing folding at the upper edge of the path delimiting strip, the ECO-FALZ-LINER, unlike the ECO-LINER and EASY-LINER, cannot be bent. So if you want a rounding, we advise to use another tape.

Straight

ECO-FOLD-LINER

The path marking tape with folded top edge is available in thickness 1 mm and in standard lengths 1,500 mm and 2,000 mm with a folded edge of 4 mm. With a material thickness of 2 mm, the lengths are 1,500 mm from stock and 1,920 mm due to production. Due to the fold, the lawn edge looks like 6 mm. On the construction site, the strips can be cut to the right length with a cut-off grinder.

Accessories

ECO-FOLD-LINER

As a rule, the path delimitation strips can be quickly and easily fixed in the ground. Thanks to our connectors, this can be done with little effort: simply hammer the turf tape together with a connector into the ground to the desired depth. Alternatively, there is also a connector with angle and skewer, and for the corner already prefabricated corner pieces, which only need to be bent by hand.

Assembly tips

ECO-FOLD-LINER

It only takes a few things to anchor the LINERs stably in the ground: an angle grinder (alternatively a hacksaw), with which you can saw the bands to the right length, and a rubber mallet to sink the bands together with the connectors into the ground.
In individual cases, you can also hammer in the lawn edges without connectors at all. This is possible where there is no special load.

Mounting examples

ECO-FOLD-LINER

  • Variant 1 is intended to drive the edges of the lawn directly into existing terrain.
  • Variant 2 is developed for new installations. Here, the angle can be conveniently fixed on a flat surface and then the further floor construction.
  • With variant 3, you can use residual material to give the tape additional stability and thus provide a neat anchorage.

Everything important at a glance.

ECO-FOLD-LINER

Information material

Technical product info
ECO-FOLD-LINER