TREND – Planters

TREND
Planters

Planter TREND for the terrace

With our high-quality TREND planters made of metal, you can really put your plants in the spotlight and upgrade any entrance area or terrace. Our TREND planters are available in square-cube and square-conical versions and also with or without a water-permeable base. We recommend placing a coaster underneath to prevent rust staining. All planters are made by Gartenmetall®.

If you are looking for larger planters, we recommend you take a look at our TERRESTAraised beds or RONDAplanting rings. More ideas from the category SOILyou can find here.

The plant troughs are characterised by:

  • High quality laser cutting
  • Round edges due to C-shaped folding at the top edge,
    40 mm wide, 20 mm deep
  • Completely welded incl. water-permeable base
  • High-quality materials: Corten steel, stainless steel or powder-coated stainless steel

Planter TREND – Square-shaped planters

There is a place for the cube-shaped planters with a square base in every garden, on every terrace or in every entrance area. The planters are equipped with a water-permeable base as standard. If the plant troughs are going to be filled directly with soil, we recommend lining the insides with root insulation boards. The panels made of polystyrene rigid foam provide protection for the root area against heat and frost damage. Especially when placing corten steel planters, a coaster should be placed underneath as a precaution. This prevents rust marks on patio and decking surfaces.

TREND square-shaped planter made of corten steel

Square-shaped planters TREND made of Corten steel in the standard heights 800 mm, 600 mm and 400 mm

TREND Square-shaped planters, colour-coated

Square-shaped planters TREND made of powder-coated stainless steel, colour anthracite, in the standard heights 800 mm, 600 mm and 400 mm.

Cone-shaped Planters

Our conical TREND planters have a square base and look particularly elegant thanks to their narrow base. The shape really shows off grasses or taller plants.
The bottom of the metal planters is water-permeable as standard and all edges are rounded. If the plant troughs are going to be filled directly with soil, we recommend lining the insides with root insulation boards. The panels made of polystyrene rigid foam provide protection for the root area against heat and frost damage. Especially when placing corten steel planters, a coaster should be placed underneath as a precaution. This prevents rust marks on patio and decking surfaces.

TREND Planter Square-Conical 900, Overview

Conical planters TREND, height 900 mm, made of Corten steel, stainless steel or colour-coated stainless steel
 

TREND Planter Square-Conical 500, Overview

Conical planters TREND, height 500 mm, made of Corten steel, stainless steel or colour-coated stainless steel
 

Accessories for metal planters

Coaster for planter

A stainless steel coaster protects the patio floor from soil and rust water. Since coasters have a limited water‐holding capacity, water will always overflow during periods of heavy rain, causing some contamination. It is essential to install non‐conductive spacers made of wood or synthetic material with a minimum thickness of 10 mm between the corten steel planter and the stainless steel base. Only then is it possible for the planter to dry out again, even in the bottom area.

Coaster stainless steel for planters

Root insulation board

Root insulation boards made of extruded polystyrene hard foam (XPS), 20 mm thick, which are adapted on site, are recommended to protect the root zone from frost and heat.

Root insulation board made of rigid polystyrene foam (XPS)

SurfacesThe following surfaces are available:

Information Material

TITEL Produktinfo Pflanzkübel

Technical product info / Assembly instructions
PLANTERS

198 KB